PF22+Soap

MTM Hydro's Italian Manufactured PF22.2 foam cannon stands alone as the most reliable foam cannon in the industry. With its new standing one-liter foam cannon bottle, you no longer have to worry about spills and tipping over. Whether you are foaming down your car on the weekend or are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill the foam cannon bottle with your desired ratio of cleaning liquid, and you are up and running.

MTM Hydro's Italian Manufactured PF22.2 foam cannon stands alone as the most reliable foam cannon in the industry. With its new standing one-liter foam cannon bottle, you no longer have to worry about spills and tipping over. Whether you are foaming down your car on the weekend or are a professional contract cleaner foaming hog barn for hours, this tool will save you time and money. Simply attach the foam cannon to your pressure washer using one of the included fittings, fill the foam cannon bottle with your desired ratio of cleaning liquid, and you are up and running.

Specifications:

• Min. 1,100 psi - Max. 5,000 psi
• Min. 1.4 gpm - Max. 5.3 gpm
• Max. 140°F

Included Items Note:

• Italian Nickel Plated Brass -Single Cast Foam Cannon body
• Italian Calibrated 32 oz New Stand up Grey Bottle
• 1/4" x 9" tube for drawing chemical
• 3.5 Orifice (1.25mm) installed in the Foamer Body
• 3.0 Orifice (1.1mm) included with kit
• Fitting pack (2-pieces) containing a 1/4" M22 adaptor and 1/4" QC Plated Steel Plug *
• Manual with care instructions and exploded view

PROP65 WARNING

The products we sell are not intended for use in potable water systems and are only for industrial non-drinking water applications.

How-To Start Foaming 

Simply add 2-4 oz. of soap, fill the rest with water, and attach it to your pressure washer using one of the included fittings and you are foaming! The PF22.2 atomizes enough soap for two mid-sizes vehicles each bottle!

The PF22 has a patented nozzle chamber with adjustable fan blades, an adjustable spray pattern (vertical or horizontal), an air intake knob that allows for more or less air to be drawn into the chamber, increasing or decreasing the thickness of the foam that it sprays onto your vehicle, house, fence, patio, roof, pool deck, farm or locker room, etc.  

Note:

The full spectrum of ratings are not supported by the 3.5 or 3.0 orifices included with this kit. Other orifices may be required for higher flow machines that have lower PSI- Example: 2000 PSI with 3.5 GPM requires a 5.0 Orifice. For larger orifices, you will know it does not work because you will experience starting and stopping of the foam cannon as your unloader slips in and out of bypass. You will also get watery foam as the orifice size 3.5 is significantly smaller than the 5.0 needed for your machine. MTM Foam Cannons will not work with flow sensing unloaders as you will experience the same results listed for an under-sized orifice.